Dave and his son did a great job on our garage floor. They were straightforward about the process and the finished coating looks sharp.
Porch Polyurea Flake Coating in Rochester, MN
Dave Strebbing Tile & Stone installs porch polyurea flake coatings for Rochester, MN homeowners who want a durable, low-maintenance surface.
- Flexible polyurea base coat moves with the concrete through Rochester's freeze-thaw cycles, reducing the risk of cracking or peeling
- Non-porous topcoat blocks road salt, moisture, and de-icing chemicals from reaching the concrete slab
- UV-stable finish resists yellowing and color fade from direct sunlight on exposed porch surfaces
- Decorative vinyl flake layer adds built-in texture that improves slip resistance underfoot in wet or icy conditions
- Sealed surface cleans with a hose or mop and does not require special chemical cleaners or periodic refinishing
- Protects existing concrete from further pitting, spalling, and staining, preserving the structural surface and curb appeal of the home
Expert Porch Polyurea Flake Coating in Rochester, MN
Porch polyurea flake coating is a multi-layer system that protects and beautifies concrete porch surfaces in Rochester, MN. We start with diamond grinding the existing concrete to open the surface and create a strong mechanical bond. A polyurea base coat is then applied directly to the prepared slab. Decorative vinyl flakes are broadcast into the wet base coat for color and texture. A clear topcoat seals the system, locking in the flakes and adding chemical and abrasion resistance. Rochester porches face a hard freeze-thaw cycle each year. Water seeps into bare concrete, freezes, expands, and slowly breaks the surface apart from the inside. A properly installed polyurea flake system creates a non-porous barrier that blocks moisture and salt before they reach the slab. The result is a porch floor that holds up through Minnesota winters, stays slip-resistant underfoot, and cleans up with a simple rinse. If your porch concrete is pitting, staining, or showing wear, contact Dave Strebbing Tile & Stone to schedule a site visit.
What's included
- Flexible polyurea base coat moves with the concrete through Rochester's freeze-thaw cycles, reducing the risk of cracking or peeling
- Non-porous topcoat blocks road salt, moisture, and de-icing chemicals from reaching the concrete slab
- UV-stable finish resists yellowing and color fade from direct sunlight on exposed porch surfaces
- Decorative vinyl flake layer adds built-in texture that improves slip resistance underfoot in wet or icy conditions
- Sealed surface cleans with a hose or mop and does not require special chemical cleaners or periodic refinishing
- Protects existing concrete from further pitting, spalling, and staining, preserving the structural surface and curb appeal of the home
More Polyurea Flooring Contractor Services
Need this service?
Get a clear roof assessment before you commit.
Porch Polyurea Flake Coating FAQ
Common questions about porch polyurea flake coating in Rochester, MN.
Yes, polyurea flake coating is well-suited for Rochester porches because it flexes with the concrete through freeze-thaw cycles and resists moisture. It holds up through Minnesota winters better than paint or basic sealers.
No, the vinyl flake layer adds texture that improves traction on wet surfaces. Rochester homeowners with coated porches find the surface safer underfoot than bare or painted concrete.
Damaged areas are repaired during surface preparation before any coating is applied. Minor cracks and pitting in Rochester porch slabs are addressed as part of the prep process.
A simple rinse with a hose or a mop with water removes most dirt and debris. No special cleaners or treatments are needed to keep the surface in good condition.
No, the topcoat used in this system is UV-stable and resists yellowing and color fade from sunlight. The finish stays consistent even on south- or west-facing porches that get direct afternoon sun.
Contact Dave Strebbing Tile & Stone directly to schedule a site visit for your Rochester porch. A contractor will assess the concrete condition and walk you through the coating options.
Still have questions?
Call us directly. Real answers, no scripts.
What Olmsted County homeowners say.
Worked with us?
Leave a ReviewProudly Based in Rochester, MN
Stop by, call, or book online — we're always nearby when you need us.
Phone
(507) 259-6560Hours
- Monday 7:00 AM - 8:00 PM
- Tuesday 7:00 AM - 8:00 PM
- Wednesday 7:00 AM - 8:00 PM
- Thursday 7:00 AM - 8:00 PM
- Friday 7:00 AM - 8:00 PM
- Saturday Closed
- Sunday Closed